I
O
NSTALLATION AND
PERATION
ClimaticControl-HC Heating & Cooling Controller
IMPORTANT!
Before starting work the installer should carefully read this Installation & Operation Manual, and make sure all in-
structions contained therein are understood and observed.
ClimaticControl-HC should be mounted, operated and maintained by specially trained personnel only. Personnel in
the course of training are only allowed to handle the product under the supervision of an experienced fitter. Subject
to observation of the above terms, the manufacture shall assume the liability for the equipment as provided by legal
stipulations.
All instructions in this Installation & Operation manual should be observed when working with the control. Any other
application shall not comply with the regulations. The manufacturer shall not be liable in case of incompetent use of
the control. Any modifications and amendments are not allowed for safety reasons. ClimaticControl-HC mainte-
nance may be performed by service shops approved by the manufacturer only.
The functionality of the control depends on the model and equipment. This installation leaflet is part of the product
and has to be obtained.
Subject to technical modification!
Table of content
1
Application ................................................................................................................................................ 4
2
3
Safety Instructions .................................................................................................................................... 4
4
Display ...................................................................................................................................................... 5
5
5.1
5.2
Electrical connections............................................................................................................................... 6
5.3
5.3.1
5.3.2
5.3.3
5.3.4
5.3.5
5.4
5.5
Inputs functions (In1 & In2) ...................................................................................................................... 9
5.5.1
Input1 ....................................................................................................................................................... 9
5.5.2
Input2 ..................................................................................................................................................... 10
6
6.1
Types of operating modes ...................................................................................................................... 12
6.2
Program Mode ........................................................................................................................................ 14
6.2.1
7
System Parameter Menu ....................................................................................................................... 16
7.1
System parameters setting .................................................................................................................... 16
7.2
Heating & Cooling curves ....................................................................................................................... 21
7.3
8
Technical Data / Materials ...................................................................................................................... 21
9
TROUBLE-SHOOTING .......................................................................................................................... 22
10
Hydraulic example .................................................................................................................................. 23
10.1
10.2
10.3
10.4
10.5
10.6
M
ANUAL
3
GB