Replacing The Light Bulb; Shipment And Repositioning; Transportation And Changing Of Installation Position; Before Calling Your After Sales Service - Stengel KU 1101 A++ Guide D'utilisation

Replacing the light bulb

To replace the bulb in freezer and fridge departments;
1- Unplug your fridge.
2- Remove the cover of the box from the claws using a screwdriver.
3- Replace with a bulb of maximum 15 Watts.
4- Install the cover.
5- Wait for 5 minutes before re-plugging and bring the thermostat to its original position.
Replacing LED Lighting
If your refrigerator has LED lighting contact the help desk as this should be changed by
authorized personnel only.
PART - 5.

SHIPMENT AND REPOSITIONING

Transportation and changing of installation position

• Original package and foam may be kept for re-transportation (optionally).
• You should fasten your fridge with thick package, bands or strong cords and follow the
instructions for transportation on the package for re-transportation.
• Remove movable parts (shelves, accessories, ve-
getable bins etc.) or fix them into the fridge against
shocks using bands during re-positioning and
transportation.
Carry your fridge in the upright position.
PART - 6.

BEFORE CALLING YOUR AFTER SALES SERVICE

If your refrigerator is not working properly,it may be a minor problem, therefore check the
following, before calling an electrician to save time and money.
What to do if your refrigerator does not operate ;
Check that ;
• There is no power ,
• The general switch in your home is disconnected ,
• The thermostat setting is on "•" position ,
• The socket is not sufficient. To check this, plug in another appliance that you know which
is working into the same socket.
EN -26-