Publicité
Step Six
To Light:
- Place a full burn cup into the
recession in the center of the
burner.
- Light the gel fuel with an
extended lighter or long match
- Burn time will be approximately
1.5 to 2 hours.
9
All manuals and user guides at all-guides.com
5
To Extinguish:
- Place the snu er end of the
scraper tool (3) over the opening
on the Burn Cup. Hold in place
for 5-10 seconds until ame is
extinguished.
Care and Cleaning
Burn cup should be cleaned every two burns. This can be cleaned
with the snu er tool included.
- Allow can to cool completely before attempting to clean.
- Place the straight edge of the scraper into the can and
pull along the edge.
- Residue should be thrown away in the trash.
10
Publicité
