Publicité
Operations
Control Panel
01
1.
Button
Press and hold this button for 3 seconds to power on; press and hold this button for
3 seconds to power off.
2. Display Window
Shows the set temperature.
3.
Temperature Down Button
• A (short press): When you press the button, the system immediately flashes and
displays the current set temperature. Each press decreases the set temperature value
by 1 °C (or 1 °F). Once the minimum possible set temperature is reached (such as 1 °C /
34 °F), the value no longer changes.
• B (press and hold for more than 1 second): When you press the button, the system
immediately flashes and displays the current set temperature. When you press and
hold the button, the set temperature will decrease by 1 °C (or 1 °F). Once the minimum
possible set temperature is reached (such as 1 °C / 34 °F), the value no longer changes.
4.
Temperature Up Button
• A (short press): When you press the button, the system immediately flashes and
displays the current set temperature. Each press increases the set temperature value
by 1 °C (or 1 °F). Once the maximum possible set temperature is reached (such as 10 °
C / 50 °F), the value no longer changes.
• B (press and hold for more than 1 second): When you press the button, the system
immediately flashes and displays the current set temperature. When you press and
hold the button, the set temperature will increase by 1 °C (or 1 °F). Once the maximum
possible set temperature is reached (such as 10 °C / 50 °F), the value no longer
changes. Setup ends after you stop pressing the button.
Dacor_BRR5500D_EN.indd 19
02
03
04
05 07
06 07
English 19
2024-05-21
4:58:06
Publicité
