Publicité
OM 0627
• The clutch aligner tool set can be used on all the brand and models of vehicles.
• Guarantee to operate and to fi t perfectly in all cases of di erent hole crankshaft variations.
PROBLEME 1*: when the clutch pilot bearing is inside the crankshaft hole, its diameter is smaller
than the inner
diameter of the clutch disk;
SOLUTION 1
PROBLEME 2*: When the clutch pilot bearing is not inside the crankshaft hole, the diameter of
the hole is larger than the diameter of the clutch disk.
SOLUTION 2
The kit fi ts and can be used in both options above mentioned thanks to accessories included.
• The clutch aligner tool set is essential for mounting the gearbox properly and for letting the
clutch working properly. A correct clutch alignment, during the mounting phase allows:
- To decrease vibrations
- To save fuel
- To decrease emissions
- no misalignment between engine and gearbox
- long-lasting clutche
- don't void the warranty of the clutch
DUAL CLUTCH SYSTEM (DCS) ALIGNER TOOL SET
USING
A > B
A
B
A < B
A
B
A
min. Ø 15 mm
max. Ø 27
mm
A
B
B
C
Ø 15 -21 mm
Ø 12 mm
Ø 20 -25 mm
Ø 14 mm
Ø 15 mm
Publicité
