Wps - Renkforce AC1200 Guide D'installation Rapide

7. WPS

If your wireless router/access point supports WPS (Wi-Fi Protected Setup) then you can
use this method to setup your wireless extender.
Press the WPS button on your wireless router/access point to activate its WPS.

Please check the instructions for your wireless router/access
point for how long you need to hold down its WPS button.
Within two minutes, press and hold the WPS

button on the wireless extender for two
seconds. The extender's
should flash to indicate that WPS is in
progress.
The devices will establish a connection. The

extender's green
for 30 seconds to indicate a successful
connection.
green WPS LED
WPS LED should display on
16