Reset The Extender - Renkforce AC1200 Guide D'installation Rapide

Follow the on-screen instructions for your selected mode to complete setup. You can

configure the product for 2.4 GHz and/or 5GHz Wi-Fi.
For more advanced configurations, use the browser based configuration interface at
http://renkforce.setup (refer to the user manual for more information).

6. Reset the Extender

If you experience problems with your extender or if you want to change the extender to a
different operating mode, you can reset the device back to its factory settings. This resets
all settings back to default.
Press and hold the WPS button for at least 10

seconds and release when the
LED is flashing.
Wait for the extender to restart. The extender is

ready for setup when the
displays on.
green power
green power LED
15