Switch - Renkforce AC1200 Guide D'installation Rapide

4. Switch

The EW-7476RPC includes a hardware switch on the underside of
the device which can switch between normal, green mode and
sleep mode as shown in the table below. "Wi-Fi power" refers to
the strength of the extender's wireless radio signal (Tx).
If you are using the extender in a small or medium sized space,
you may not need the full power of the wireless radio. Try it, and
determine if you still have sufficient Wi-Fi coverage using green mode. If so, you can save
some energy.
Green Mode
Sleep Mode
Tx power can also be adjusted using the web-based U.I.
(Administration  Wireless). Set the switch to "Normal"
before adjusting the Tx value in the web-based U.I.
Mode Switch Position
Normal Top 100% Wi-Fi power
Middle 50% Wi-Fi power
Bottom Wi-Fi & LEDs off
11
Description