Publicité
SET function
SET
Press the SET button to enter the function setting, then press SET button or TEMP
button to select the desired function. The selected symbol will flash on the display area, press the
OK button to confirm.
To cancel the selected function, just perform the same procedures as above.
Press the SET button to scroll through operation functions as follows:
Breeze away (
*
Follow Me(
)
AP mode (
[ ]: Model dependent
*
Breeze Away function(
This feature avoids direct air flow blowing on the
body and makes you feel indulging in silky
coolness.
NOTE:
This feature is available under cool,
Fan and Dry mode only.
)
Active clean/Self clean (
*
)
Breeze away....
) (some units) :
)
Fresh/UV-C lamp (
Active clean function(
The Active Clean Technology washes away dust,
mold, and grease that may cause odors when it
adheres to the heat exchanger by automatically
freezing and then rapidly thawing the frost.
When this function is turned on, the indoor unit
display window appears "CL", after 20 to 45
minutes, the unit will turn off automatically and
cancel CLEAN function.
14
OK
or TEMP
*
)
Sleep(
)
) (some units) :
Publicité
