Publicité
Troubleshooting/Error Codes
Error
4 Flashing
Lights on
Control Panel
Low & Low-Med
Lights Flashing
Low & Med-
High Lights
Flashing
Low & High
Lights Flashing
Keep the induction range away from other ovens or stoves. If the
surrounding temperature is hot, the induction range may stop heating.
Service & Repair
Never attempt to service any part of The Unlimited Induction Range.
Attempting to service the unit on your own, or through an unauthorized
repair facility, automatically voids your warranty. Contact our Service
Department at 630-527-8600. For service forms, visit the Spring USA
website.
Warranty
Spring USA Induction Ranges offer a one-year, overnight exchange
warranty (continental US only), from the date of invoice, against
manufacturers defects. Visit the Spring USA website for more details.
Cause
The induction range does
not sense an induction-
ready vessel on the surface.
The range has overheated
due to blocked ventilation
and has shut down.
Overheating protection has
been activated and the
range has shut down.
The range is experiencing
temporary voltage
overload.
Place an induction ready vessel
on the range.
Clear vents, let the range cool
and restart the range.
Remove vessel from the range,
let the range cool and restart the
range.
Remove vessel from the range,
let the range cool and restart the
range. Review dedicated power
requirements under Installation
in this manual.
7
Solution
Publicité
