Télécharger Imprimer la page

gala gar H-Optimus Manuel Technique D'instructions page 12

Publicité

Torches handles
4. IMMEDIATELY CLOSE THE FUEL GAS ADJUSTMENT COCK.
5. WAIT UNTIL THE FLAME GOES OUT INSIDE THE TORCH AND THE WHISTLING NOISE
DISAPPEARS.
6. COOL THE NOZZLE TIP AND THE TORCH.
7. CHECK THAT THE TORCH AND THE NOZZLES ARE IN GOOD CONDITIONS TO CONTINUE
WORKING. IF IN DOUBT REQUEST IT TO BE CHECKED BY TECHNICALLY QUALIFIED
PERSONNEL.
5.- WHAT TO DO IN THE CASE OF BREAKDOWNS
If, during operation, a flame appears in the nozzle tip seating area due to leaks, or the classical
flashback noise is heard, tighten the nozzle tip by fastening the nut. If the problem does not disappear,
request the equipment to be repaired.
If the flame continually goes out for no apparent reason or when the cutting oxygen level is activated,
check that the pressures are correct for the nozzle tip being used. If the problem is not solved request
the equipment to be repaired.
If leaks are observed in any part of the torch, request the equipment to be repaired immediately.
After a strong flame flashback the torch may have undergone serious damage. Check its state with care
and if in doubt, request it to be checked.
To obtain a good cut with the torch, the correct nozzle tips must be used with the different pressures and
they must be in good conditions. Avoid knocking the nozzles tips and clean them whenever necessary.
If lack of flow is observed in the nozzle tip and the pressures are correct, check the torch safety valves,
as they may be blocked up.
6.- SERVICING AND MAINTENANCE
-
From time to time watertightness and operation tests must be made on the torch by technically
qualified personnel.
-
Any repairs on the torch must be done by specialized personnel. Always request original parts with
GALA GAR's guarantee.
-
Dismount the nozzle tips from time to time and clean them with brushes. Check the state of the
injector and clean away any particles which might block it up, taking care not to damage it.
Gala Gar, S.L. c/ Jaime Ferrán, 19 (Políg. Cogullada) | Tel.: (+34) 976 47 34 10 - 50014 ZARAGOZA |
1/2
www.galagar.com

Publicité

loading

Ce manuel est également adapté pour:

Mango universalMinor758000017020010010500000