Publicité
Always unplug the unit from mains power supply
before attempting any cleaning or user maintenance.
MAINTENANCE AND CLEANING
The water tank must be drained of any water after
each use. To do so, carefully pull the water tank out
from the unit then hold a suitable vessel underneath
to catch the water. Once the water tank has been
drained, wipe away any excess water with a soft
cloth.
To clean the evaporation pad and mesh filter, pull
them up and away from the back of the unit, then
wash them in warm water with a mild detergent and
a soft brush. Take care not to pierce the pad and filter.
Before replacing the evaporation pad and mesh filter,
check the drain hole for any debris or blockages and
remove if necessary.
Wipe the unit with soft, damp cloth and dry
thoroughly
Do not use flammable liquid, abrasive cleaning
solvents, polishes or scouring pads to clean the
humidifier, as this may cause damage.
Please ensure that the unit and all of its parts are
cleaned regularly to reduce the risk of limescale and
bacteria forming. The evaporation pad must be
installed flatly, in order to avoid leaking.
Attention: Must unplug the power plug when
cleaning.
Don't make the water into the control panel.
The evaporation pad must be installed flatly, in order
to avoid leaking.
Page 17 of 20
Publicité
