Publicité
- Make sure the product is unplugged from the mains
USE
before filling or refilling the water.
Attention!
- Only use water in the water tank. Do not add any
chemicals ,oils or other additives.
- Only use cold water in the water tank(previously
boiled)
- Make sure the water level in the water tank is between
minimum level .( indicated by "Min")and maximum
level(indicated by "Max")
Starting the unit and changing the wind speed. Press
0-1-2-3 key to set the desired fan speed. Wind speed is
1. Speed Button
divided into OFF-LOW-MID-HIGH for related wind
speed. "0" button is for turning the unit OFF.
When adding water or ice, press this button,
temperature will go lower after working.
2. Cool/ Humidify Button
(Attention:DO NOT USE "humidification" when the
water tank is empty or its filled water below the Min. If
Water less than MIN, when humidification working,no
water in pipe, which will destroy the pump.)
Press this button to swing the wind from left to right.
3. Oscillation Button
Page 16 of 20
Publicité
