Publicité
1. Planning the position of
the cabinets, position the
workbench
2. Align the pegboard and screw them onto the wall with
No. 2 x 4 each
Flat Washer
12
Setup
No. 4 x 4 each M5 x 50mm Hex Tapping Bolt
3. Connect the two wall cabinets with the shelves
No. 1 x 16
M6 Hex Flange Nut
No. 5 x 16
M6 x 12mm
Flat-Head Bolt
4. Open the door of the wall cabinet, connect the wall cabinet
assembly to the wall. Two or more person is recommended for this
step.
No. 2 x 8
Flat Washer
5. Roll the tool cabinet
under the workbench
No. 4 x 8
M5 x 50mm Hex
Tapping Bolt
13
Publicité
