Publicité
No. 9 x 4 each
Casters
No. 10 x 16 each
M8 x 20mm Hex
Flange Bolt
Installing the Feet
Carefully set the locker on its back, then attach the adjustable
leveling feet to the locker using sixteen M6x12 flat-head bolts with a
Philips screw driver.
No. 5 x 16
No. 7 x 4
M6 x 12mm
Adjustable Leveling
Flat-Head Bolt
Feet
10
Installing the Shelves
Check the location need, carefully put the shelf into the slot.
Please make sure the shelf is stable.
NOTE: A center shelf must be installed level with the lock on
the cabinet door in order for lock to work.
No. 8
Shelf
Installing the Workbench
1. Lay down the work top on a soft surface, align the holes on the
legs with that on the worktop.
Use four M8x16 bolts to connecting them together.
2. Use four M8x65 hex bolts and four M8 nuts to fasten support to
the legs.
3. Fasten all the bolts and nuts.
4. Stand up the workbench to finish this step.
No. 13 x 4
No. 14 x 4
M8 x 65mm Hex bolt
M8 Nut
No. 12 x 8
M8 x 16 Flat-head
bolt
11
Publicité
