Publicité
Menu operations
Menu operations
1
(Hold)
If no operation is done for about 60 seconds, the
operation will be canceled.
2
Menu item
DEMO
Clock Display
Set Clock
24H/12H
Clock Adjust
Color
Color Setup
Dimmer Set
Brightness
Scroll *2
Tag Display
LCD Type
Contrast
EQ/DSP
*1
The illumination control lead connection is required. (See "Installation/Connection Manual".)
This setting may not work correctly on some vehicles (particularly on those having a control
dial for dimming). In this case, change the setting to other than <Dimmer Auto>.
*2
Some characters or symbols will not be shown correctly (or will be blanked) on the display.
*3
Depends on the <Dimmer Set> setting.
24
| ENGLISH
Selectable setting (Initial: [XX])
For settings,
page 4.
On: Shows the clock display when the power is off.
[Off]: Cancels.
For settings,
page 4.
For settings,
page 4.
Off: Cancels.
[Auto]: The built-in clock is synchronized with the clock data received from
the FM Radio Data System station.
For settings,
page 18.
Selects the display and button illumination adjusted in the <Brightness>/
<Color Setup> setting.
Off: Selects the Day adjustments.
On: Selects the Night adjustments.
[Auto]: Changes between the Day and Night adjustments when you turn
off/on the car headlights. *1
Time Set: Sets the start/end timer for dimmer. Turn the control dial to
adjust the start time, then press the control dial to confirm. Repeat this step
to enter the end time.
Day Brightness[31]/Night Brightness[11]: Brightness settings for the
display and button illumination for day and night.
Button Zone/Display Zone: Sets the brightness levels 00 — 31.
Off: Cancels.
[Once]: Scrolls the display information once.
Auto: Repeats scrolling (at 5-second intervals).
[On]: Shows the TAG information while playing MP3/WMA/WAV tracks.
Off: Cancels.
[Negative]: Negative pattern of the display.
Positive: Positive pattern of the display.
Auto: Positive pattern will be selected during the day*3, while negative will
be selected during the night*3.
Level 01 — Level 15 [Level 09]: Adjusts the contrast of the display to
make indications clear and legible.
For settings,
page 19.
3 Repeat step 2 if necessary.
To return to the previous menu, press
To exit from the menu, press DISP or MENU.
.
Publicité
