Publicité
Operating Information
The UHP 3D headpiece is compatible with the Naída CI (CI-5245, CI-5260,
and CI-5280) and Neptune (CI-5240) sound processors, associated cables
(CI-5413 and CI-5415), 3D Magnets, UHP 3D Color Caps, and the HiRes
Ultra 3D cochlear implant (CI-1601).
To operate your headpiece with your cochlear implant system you will need
to install a 3D Magnet, and attach a UHP 3D Color Cap, as follows:
1.
Insert the 3D Magnet into the magnet well of the headpiece so that the
arrow(s) on the magnet point up when the headpiece is on the head. The
image below shows the acceptable window for upward orientation of the
magnet arrows. The 3D Color Cap Removal Tool can be used to make
adjustments to the magnet orientation when the magnet is in the well.
Good
Not
Good
7
Publicité
