Télécharger Imprimer la page

Eneo MED-62V2713M0A Instructions D'installation page 11

Publicité

generates only one video output for both main video output and sub-out. It takes 3~5
seconds when video format is changing. The default DIP SWITCH setting is CVBS mode.
Joystick setting
Switching video format is available by Video format joystick. If you want to set the HD
video format, set the DIP Switch to HD mode first. Then set the one of HD Video format by
joystick. The default setting is TVI mode.
1. TVI mode (Up ▲) : Moving up direction for about 3 seconds to TVI mode.
2. CVBS (Down ▼) : Moving down direction for about 3 seconds to CVBS.
3. AHD (Left ◄) : Moving left direction for about 3 seconds to AHD.
4. CVI mode (Right ►) : Moving right direction for about 3 seconds to CVI mode.
OSD menu startup
Press the 'OSD menu SET key' down to access the setup menu mode.
• EXIT : Enters 'EXIT' menu.
• RETURN : Returns to the previous menu.
• DEFAULT : Restores to factory default.
OSD menu table
MENU
SUB MENU
DC
LENS
MANUAL
FOCUS ASSIST
DN DWELL
CONFIGURATION
MODE
IRIS SPEED
INDOOOR, OUTDOOR
EN
11

Publicité

loading

Ce manuel est également adapté pour:

Med-62v2812m0b