Publicité
UNPACKING INSTRUCTION
CAUTION Carefully unpack the box upon receipt. Check the contents to ensure that all parts are present and have been
received in good condition. Notify the shipper immediately and retain packaging material if any parts appear damaged from
shipping or the package itself shows signs of mishandling. Save the package and all packaging materials. If the product must be
returned, it is important that the product is returned in the original factory box and packaging. If the device has been exposed to
drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately. The arising condensation water might
damage your device. Leave the device switched off until it has reached room temperature..
POWERSUPPLY
The label on the bottom of the product indicates to what type of power supply the product must be connected. Check that the
mains voltage corresponds to this, all other voltages may cause irreparable damage. The product must also be directly
connected to the mains, no dimmer or adjustable power supply.
Always connect the device to a protected circuit (circuit breaker or fuse). Make sure the device has an appropriate
electrical ground to avoid the risk of electrocution or fire.
ASSEMBLY INSTRUCTIONS BENCH
1. Place the seat upside down.
2. Lift both the left and right legs upwards.
3. Slide leg supports into brackets to lock the legs in position.
4. Rotate the caps to stabilize the bench.
NOTE: make sure the leg supports are sitting all the way inside the bracket.
ASSEMBLY INSTRUCTIONS STAND
1. Place the feet on the floor in the position indicated in the illustration.
2. Using the screws, secure the X bracket onto the feet using the Allen wrench
3. Place the upper support bars onto the upper part of the bracket and secure with the screws using the Allen wrench. Do not
overtighten.
Sit down and play music like never before.
Publicité
