Blue Sky Outdoor Living RFRI2812 Manuel Du Propriétaire page 8

Step 3
Make sure the holes on the panels line up and slide 2 fasteners (C), from the
outside of the panel, through the two holes. From the inside of the panel
slide 2 lock washers (E) over the fasteners and finger tighten with 2 nuts (D).
Repeat with the remaining panels.
Step 4
Once the fourth panel is secured, place the first flange over the top of one
side of the fire pit insert as shown. Make sure not to install the fasteners until
all four flanges are in place.
8 | www.bluesk youtdoorliving.com