Blue Sky Outdoor Living RFRI2812 Manuel Du Propriétaire page 7

ASSEMBLY
TOOLS REQUIRED:
Phillips Screwdriver, 10mm socket or adjustable wrench, rake, level
STEP 1
Decide on location for the fire ring insert. Make sure the fire ring insert is a safe
distance from all combustible materials. If using directly on the ground, level the
area with a rake if necessary and remove any dry grass, overhanging branches, or
other materials that could create a fire hazard.
Place the four side panels on a flat level surface (place a sheet of cardboard or a cloth
in the assembly area to avoid scratching the outside surface of the panels).
STEP 2
Finger tighten fasteners until all panels are assembled - then finish by tightening all
panels with a screwdriver and a wrench.
Line up two panels so one end with the full opening and one end with the inner
fastener guides, slide together. The panel with the inner fastener guides will slide
inside the other panel.
7 | www.bluesk youtdoorliving.com
Inner
Fastner
Guide
Full
Opening