Publicité
Use only machine tools, accessories and consumables, which are recommended by the
manufacturer. Make sure choosing the correct size and the correct type. Use only accessories,
which are in proper condition.
CAUTION – Injury due to carelessness!
If the machine is fixed to suspension equipment make sure that it is secure.
Never hang the machine onto the supply line.
• Separate the machine from any external energy source before changing the
machine tool or any accessory.
• Avoid direct contact with the machine tool during and after use as it can be hot
or sharp.
Wear protective gloves when changing a tool or an accessory!
Notice: Defective/ inappropriate gloves can lead to injury. Wear only proper hand
protection, adapted to the work place requirements
WARNING – Explosion hazard!
When operating the machine in areas exposed to explosion hazards, use only
accessories, respectively devices, which are ATEX approved and specified.
ATTENTION – Improper Transport, injury due to parts falling down!
Damage of the machine!
• Separate the machine from any external energy source before transportation.
Check that the machine is undamaged and in proper condition.
• Never carry the machine at the supply line.
Wear worker's protective shoes!
SAFETY INSTRUCTIONS FOR PREVENTION
OF ACCESSORY HAZARDS
SAFETY INSTRUCTIONS FOR PREVENTION
OF TRANSPORT HAZARDS
49
Publicité
