Publicité
CARE INSTRUCTIONS
1/ Your product
Proper�es
Aluminium is a light, resistant material that doesn't rust.
Texaline is a cloth made up of polyester fibres covered with braided PVC.
Manufacturing and assembly
The manufacturing then assembly of this product requires leaving clearance between the different parts.
It is therefore normal to observe gaps/slack that may reach several millimetres between the different
assembled elements (between two slats, between boards...).
This tolerance necessary for the correct realisa�on of your product can be behind li�le geometric differences.
This does not lead to any loss of func�on of your product.
Irregular appearance
Each product is manufactured and assembled industrially from parts whose surface treatment is carried out
individually, before assembly. These metallic elements cannot be free from appearance irregulari�es coming
both from the surface treatment process and assembly opera�ons. The final appearance of the product is
therefore directly linked to these possible irregulari�es.
Regularity of seams
Although we pay special a�en�on to the quality and regularity of seams, it is possible to no�ce that some
threads are not cut a�er the break point of the seam. There is no risk of the seam becoming undone. Cut this
thread with a simple pair of scissors.
2/ Precau�ons for use
Watch out for blows from knives and other sharp objects handled nearby. Watch out too for burns from
cigare�es and from other heat sources.
3/ Maintenance and ageing, siding
It is normal to note natural wear and tear of the product over �me and with use, in the form of an altera�on
of the colours and the state of the surface, the mechanical func�ons and �ghtening of the screwed elements.
Exposure to UV rays
Over �me, you can see a discolora�on of the materials exposed to UV rays (tex�les, paint, plas�cs), a
phenomenon also due to the rays of the sun as well as those of the moon. This evolu�on of colours exposed
to external elements is normal and concerns in par�cular bright colours.
Everyday maintenance
Your product is subject to external elements, it must therefore be regularly cleaned.
Remove stains immediately.
Clean with a damp cloth soaked in warm soapy water (or hot water for more marked dirt) or a specific,
adapted product.
Rinse thoroughly.
Finish with a clean, dry cloth.
If in doubt, consult a reseller or the material sheet on the Hesperide.com website.
In the absence of regular cleaning your product will impera�vely deteriorate.
Publicité
