Publicité
fingerprints and affecting printing quality.
• Do not handle paper with wet hands and keep paper free of dust.
• Do not Write on paper before printing.
• Do not use unofficial ribbon and photo paper.
• Never reuse paper for printing, even if most of the paper is
blank. Reusing paper may damage the printer if paper jams or
the ink sheet adheres to the paper.
• Do not load paper upside-down, make sure the glossy side of a
photo paper is facing up. the photo paper is laid flat in the paper
cassette, and the paper cassette is properly installed on the
front of the printer.
• Do not block the rear of printer.
• Do not get the product wet. Do not insert foreign objects or
liquids into the product.
• The optimal working temperature for the printer is 10°C~35°C
(50°F~95°F), and the relative humidity is 40%-60%. Printing
quality maybe affected if the environmental temperature and
humidity are not appropriate.
• During printing, a photo paper needs to go through the printer
four times and will be pushed out automatically when the
printing is finished. Do not pull out the photo paper forcibly to
avoid damage to the printer.
• Do not touch any parts inside product, it may case injury.
• It is normal to have slightly different printing colors between
different printers.
• When the printer is not in use for a long time, remove the paper
cassette and close paper cassette cover the to prevent dust and
debris from entering the paper path. Otherwise, the printing
quality of first photo next time you print will be affected.
• When keeping the unused photo paper in the printer, avoid to
store it in a hot and humid environment.
• The printer has a built-in lithium battery, avoid keeping in high
temperature and high humidity environment. Charge at least
once every 3 months if not connecting to the power supply.
• Plug in the power adapter during upgrading to avoid damage to
the printer due to power failure caused by low battery.
12
Publicité
