Publicité
Function Setup
By using the buttons MENU, + and – the following functions can be set up:
Function
Channel Selection
Auto Channel Scan
Application
Select the channel
Scan the channel automatically to
for communication.
identify the occupied channel.
Operation
Number of times to press the
MENU button for entering
1x
2x
the selection menu.
Selection key
+ / -
LCD-Display
Press +/- to select
Press
to start channel
Start channel scanning
the channel.
scanning.
from the present channel.
Channel scanning stops once the signal is detected
Confirmation key
Remarks
Two radios have to be
If no signal is detected within 10 seconds or if any keys are
in the same channel in
pressed, the channel scanning function will be interrupted.
order to communicate
It will then maintain the previous channel.
with each other.
15
Publicité
