Télécharger Imprimer la page

FTC TREE ECLIPSE 3 Manuel D'instructions page 14

Publicité

[EN]
6
TRANSPORT / CARE / STORAGE / REPAIRS
6.1 - TRANSPORT
Shocks and other poor treatment can weaken the material and cause serious, and even invisible,
damage. During transport and use, take the necessary precautions. Do not put the piece of
equipment in contact with abrasive, acidic or corrosive materials that can damage it and/or
reduce its technical performance. Ropes soiled by dirt, sand, oil, etc., can cause a higher risk of
wear to the pulley and lower pulley performance.
6.2 - CLEANING / CARE
Clean water less than 30°C, clean cloth, mild detergent (see "Information" chapter).
6.3 - STORAGE / REPAIRS
In a dry place, free from exposure to weather; shocks; heat sources more than 40°C; and abrasive,
acidic or corrosive materials capable of damaging it and/or reducing its technical performance.
REPAIRS BY ANYONE OTHER THAN FTC TREE ARE PROHIBITED.
WARNING
INSPECT BEFORE AND DURING USE
• Competence of users (trained in tree care work, felling, dismantling, etc.).
• Existence of an emergency rescue plan.
• Respect of the instructions and recommendations of use.
• All labels are in place.
• Cheek plates are locked in by the upper axle.
• Existence and functioning of the safety linchpin.
• General working state of the cheek plates.
• Free movement (good rotation) and general working state of the sheave.
• Existence and proper tightening of all screws.
• Rigging rope is properly positioned within the sheave's groove.
• The pulley's ease of movement.
• Solidness of the chosen support.
• Compatibility and resistance of the rigging ropes and slings.
READ THE INSTRUCTIONS
Download the FTC TREE instructions at www.ftc-tree.com
For any question or additional information, contact the vendor.
NEVER USE IF ANY ONE OF THESE FACTORS IS NOT RESPECTED.
P. 14

Publicité

loading

Produits Connexes pour FTC TREE ECLIPSE 3