Publicité
These
options
before
pressing
button.
If an option is selected that is not
compatible
with
programme then the option indicator
light first flashes and then goes off.
SPECIAL PROGRAMMES button
This button allows you to choose between
three different options (available for some
programmes only):
- SINGLE ITEM
This option (which can be set in several
programs)
optimizes
energy consumption of the selected
program,
maintaining
performance unchanged.
SINGLE ITEM is designed for reduced
loads and lightly soiled garments, aiming
to limit the unnecessary waste.
- NIGHT WASH
This option reduces the intermediate spin
speed to 400 rpm, where applicable,
increase the water level during rinsing
and keep the laundry immersed in water
after the final rinse, in order to spread the
fiber perfectly.
During the drum water retention phase,
the machine is in pause mode.
Press PLAY to end the cycle with the
spin (which can be reduced or removed
with the specific button) and drain phase.
Thanks to electronic control, the water in
the intermediate phases is
silently, making this option very useful for
washing at night.
- DRUM CLEAN
Developed to clean the washing machine
drum.
must
be
selected
the
PLAY/PAUSE
the
selected
the
water
the
washing
emptied
Use only powder detergent.
Do not start the programme with laundry
in the washing machine.
It is suggested that this is carried out after
every 50 washing cycles.
The option can only be selected for the
DRAIN & SPIN programme.
These
options
before
pressing
button.
If an option is selected that is not
compatible
programme then the option indicator
light first flashes and then goes off.
and
TEMPERATURE SELECTION
button
This button allows you to change the
temperature of the wash cycles.
It is not possible to raise the temperature
over the maximum allowed for the
programme, in order to protect the
fabrics.
If you want carry out a cold wash all the
indicators must be off.
SPIN SELECTION button
By pressing this button, it is possible to
reduce the maximum speed, and if you
wish, the spin cycle can be cancelled.
If the label does not indicate specific
information, it is possible to use the
maximum spin expected in the program.
To prevent damage to the fabrics, it is
not possible to increase the speed
over the maximum allowed for the
programme.
70
must
be
selected
the
PLAY/PAUSE
with
the
selected
Publicité
