Publicité
Les langues disponibles
Les langues disponibles
12
10
INFORMATOIN NOISE / MEAN ACCELERATION VALUE
MAINTENANCE
All maintenance operations are carried out with the power supply disconnected.
The tools are suppressed in accordance for the prevention and elimination of
At the end of each work session, or when required, remove any dust using
radio disturbances measured in accordance with standard: EN 62841-2-17
a jet of compressed air paying the dust filter and particular attention to the
motor ventilation slots.
Sound pressure level / Sound power level
No other maintenance operations must be undertaken by the user.
L PA
L WA
Maintenance and cleaning of the inner parts, like brushes, ball bearings,
dB(A)
gears etc. or others, must be carried out only by an authorized customer-
RP84
service workshop.
84.5
96.5
ELECTRIC SAFETY - LOW TENSION
DANGER The indicated measurements refer to new power tools.Daily
The tests have been carried out in accordance with the standard:
use causes the noise and vibration values to change.
EN 60745-1 safety of hand-held electric motor operated tools
Displayed emission values are comparative and are to be employed
EN 60745-2-15 particular requirements for edge trimmers.
for a provisional assessment of the operator's risk exposure during the work
period.
RADIO SUPPRESSION
Appropriate evaluation of work period must also include tool's idle and stop
The tools are suppressed in accordance for the prevention and elimina-
periods. These emission values represent the tool's main applications. If the
tion of radio disturbances measured in accordance with standard:
tool is used for other applications, with other accessories, or if it does not
EN55014-1+EN55014-2; EN61000-3-2+EN61000-3-3.
undergo regular maintenance, emission values can significantly increase
during operations.
NOISE
The noise level, produced by the machine in normal working conditions at
the work station is 84,5 dB (A) measured according to regulation EN ISO
Use hearing protection!
3744 + UNI EN ISO 11202.
Warning: wear suitable hearing protections! (see warnings).
MEAN ACCELERATION VALUE
The mean quadratic acceleration value is less than 2,5 m/sec
in accordance with standard UNI EN28662 + UNI EN ISO 5349.
3 axis vibration level
Uncertainty
a h
Uncertainty
dB
m/s
2
3
4.25
1.5
measured
2
Publicité
