Publicité
Les langues disponibles
Les langues disponibles
① Pull open the door seal near the handle mounting hole
② Take out the Phillips head screw from the accessory bag and insert it into the handle installation hole
reserved in the door seal groove of the door body.
③ Align the mounting hole on the handle with the screw, tighten the screw with a Phillips screwdriver,
and fix the handle. Note that the upper and lower fixing holes of the handle need to be tightened with
screws.
④ After checking that there is no looseness of the handle after installation, install the pulled out door seal
back into the door seal groove, and arrange it evenly.
6. LOADING
The maximum recommended loading quantities for bottles are given as guidelines and are indicative only;
they provide a quick estimate of the size of the appliance (similar to the capacity of a refrigerator expressed
in liters).
They correspond to tests conducted with a standard bottle: the standard "75 cl light Bordeaux" bottle -
standards apply the geographical origin of each bottle shape (Bordeaux, Burgundy, Provence, etc.) and a
type (traditional, heavy, light, flute, etc.), each with its own diameter and height.
In reality and in extreme cases, you could store more bottles by stacking the same type of bottle without
using shelves, but a varied cellar comprises a wide variety of bottles and the practical aspect of everyday
cellar management limits its capacity. You will therefore probably load the appliance a little less than the
recommended maximum.
35
Publicité
