Oki C6000dn Guide De Référence Pratique page 11

Default Settings
Multi-Purpose Tray
Note
For the MP Tray, the default settings are:
• Media Type = Plain.
• Media Size = Letter
Transparencies
To Set Transparencies as the default
media in the MP Tray, 6.
Heavy Paper, Labels, Envelopes
To Set Heavy Paper, Labels, or
Envelopes as the Default Media in the
MP Tray:
First, set the Media Size
1. Press ENTER to enter the Menu
mode.
2. Press + repeatedly until MEDIA
MENU appears on the display.
3. Press ENTER.
TRAY1 PAPERSIZE
LETTER
4. Press + repeatedly until MPT
PAPER SIZE appears on the
display.
5. Press ENTER.
The second line of the display
starts blinking.
6. Press Press + repeatedly until the
second line of the display shows
the Value (for envelopes, select
COM-10 ENVELOPE) you wish to
use.
7. Press ENTER twice.
The setting is engaged and the
second line of the display stops
blinking.
All manuals and user guides at all-guides.com
*
11
Envelopes
8. : If you are setting the
MP Tray for envelopes, press ON
LINE and you are done.
Heavy paper / labels:
setting the MP Tray for heavy
paper or labels, keep going.
Heavy Paper and Labels Only:
Set the Media Type
9. Press +.
MPT MEDIATYPE
PLAIN
10.Press ENTER.
The second line of the display
starts blinking.
11.Press + repeatedly until your
choice of CARD STOCK or LABELS
appears on the second line of the
display.
12.Press ENTER.
13.Press Back.
The setting is engaged and the
second line of the display stops
blinking.
14.Press ON LINE.
The printer goes back on line.
If you are
*