Publicité
Les langues disponibles
Les langues disponibles
SRL GENERAL OPERATION
The mechanism in this device is activated by centrifugal force acting on the brakes. This action is
produced by the inertia of a fall rapidly spinning the internal drum which in turn causes the brakes to
lock and arrest the fall. Slow reeling of the line will not activate the brake. If the brake locks – due to a fall
– the mechanism will reset if the load is removed. In a fall arrest situation the mechanism will limit the
force acting on the body to less than 6kN. This device is designed to function vertically or at an angle of
no more than 30º (see Figure 2).
Figure 2
ELECTRICAL HAZARD
Due to the highly conductive nature of the materials used in the construction of this SRL, use extreme
caution when working near unprotected high voltage sources. If in doubt, ask!
SHARP EDGES, ABRASION & CUTTING
The wire rope or the webbing of the SRL should never be allowed to come in contact with sharp edges or
abrasive surfaces. Such contact could prevent the SRL from arresting a fall
WARNING: Never let the wire rope or webbing of the SRL come in contact with sharp edges or
abrasive surfaces.
5
Publicité
