Hammer Watch 2 Lite Mode D'emploi page 22

© 2024 Hammer. All rights reserved.
If there is a problem with the battery or if it needs to be
replaced, the device should be delivered to the manufacturer's
service centre.
When the battery is fully discharged, the device may not turn
on, even if it is plugged and being charged.
Improper connection of the USB plug may damage the device,
cable and/or charger. All damages resulting from improper handling
are not covered by the warranty.
The device can heat up during charging. It is a regular
occurrence and should not affect the stability or performance of
the device.
When the icon's animation stops, the battery is fully charged or the
power of the source (portable charger, laptop) is depleted and the
process can be completed.
If the device does not charge properly deliver it, with the USB
cable included, to a service center of the manufacturer.
7. Watch operation
7.1 Switching the smartwatch on/off
To turn on the device, press and hold the main button on your
watch for about 3 seconds.
To turn off the device, press and hold the main button until the
message to turn off or restart the device appears. Then select ,,Turn
off".
7.2 Smartphone connection
To connect Hammer Watch 2 Lite with a smartphone you need to
download a corresponding app. You can download it by scanning
the QR code below.
22
EN