Hammer Watch 2 Lite Mode D'emploi page 21

© 2024 Hammer. All rights reserved.
1. Screen
2. Main button/Knob
3. Button 2
4. Charging ports
5. Using the touch screen
The touch screen will be turned off after some time of
inactivity. To turn on the screen press the main button on the
smartwatch.
A touch screen of the device lets you easily select items or perform
operations. The touchscreen can be controlled by the following
actions.
5.1 Touch
Touch once to start an option, start
an application, select or launch
menu.
5.2 Swipe
Quickly swipe up, downwards (back
to desktop), left or right (changes
icon screens) to move the list or
screen.
6. Charging the battery
Slide the USB end of the charger into the adapter and connect the
other end to the charging sockets on the back of the watch. The
cable automatically engages in the correct position thanks to a
bipolar magnetic tip. When charging starts, the battery icon of the
charging screen will change to an animated (main screen), large
animated icon in the middle of the screen (device off).
Charge the battery before the first use. The battery should be
charged using the USB cable and charger base provided. Use only
chargers and cables approved by the manufacturer. Using
incompatible chargers or cables can cause explosion of the battery
or damage to your device.
5. Sensor set
6. Mic
7. Speaker
21
EN