Publicité
Les langues disponibles
Les langues disponibles
6.
Marking
The warning lights comply to the European Directives for EMC and ATEX and implicit to the
Low Voltage Directive. With regard to explosion safety the warning lights have been
E
designed and manufactured on the basis of the essential health and safety requirements of
European Directive 2014/34/EU (ATEX 114) relating to Group II Category 2GD. Harmonized
European construction standards have been applied fulfilling the essential requirements of
the directives. Please refer to chapter 5 'Technical data" and the EU Declaration of
Conformity at the last page of this user manual for more details.
II 2 G Ex mb IIC T4 Gb
II 2 D Ex mb IIIC T135 ºC Db
Cert. DEKRA 24ATEX0038 X
IECEx DEK 24.0027 X
Artidor Explosion Safety B.V., Emopad 38, 5663 PB Geldrop
The Netherlands, +31(0)40 7873911, https://www.artidor.com
Example of an AR-048 warning light label
Warning
To avoid electrostatic charge clean only with a
damp cloth. Do not use solvents.
Permitted supply short-circuit current: 50 A
The AR-048 warning label
7.
Installation instructions
•
Installation of explosion-safe equipment such as this product must be carried out by
personnel specially trained and qualified to do this, following the relevant requirements
of the installation standard EN 60079-14.
•
For the installation and use of this product the relevant safety regulations and also the
generally recognized latest state of the technology apply.
•
During assembly, care must be taken that the framework, screws and surface are strong
enough to take the weight of the warning light.
•
Isolate power from the electrical supply cable prior to installation.
Installation manual AR-048 LED warning light
8 / 36
2813
AR-048/031 Yellow
24 - 48 VDC, 4 Watt
IP65
Year: 2024
-20 °C < Ta < +60 °C
Lot & S/N: AS249999
05-2024
Publicité
