ROSIERES FE9163 Mode D'emploi Et Entretien page 14

Instructions for building in the oven (fig. 6)
The oven can be housed below the worktop or in a column unit by means of 4 screws.
Follow the drawing below.
IMPORTANT
To ensure the built-in appliance works correctly, the unit must correspond to certain
characteristics.
The panels of the units near the oven must be made of heat-resistant material. Especially as
regards veneered wooden furniture, the glues must withstand temperatures of up to 120°C:
plastic or binders that cannot withstand this temperature will deform or come unstuck.
In compliance with safety regulations, once the appliance is built in, contact with electrical
components must no longer be possible.
All protective coverings must be fixed so they cannot be removed without the aid of a tool.
12
All manuals and user guides at all-guides.com
Fig. 6