LENCO PDR-045 Guide De Démarrage Rapide page 5

Improve FM & DAB+ Reception
The number and quality of broadcast stations depends on the reception
conditions at the location of the device as well as the radio antenna.
Optimum reception can be achieved with the telescopic antenna when it
fixed and placed at the right position.
To improve the DAB/FM reception, extend the telescopic antenna to the
►
full length and alter the position. (Figure 1)
When the reception is still not better after extending the antenna, move
►
the radio to another position/room
Troubleshooting
Fault Possible cause/action
No function - If the device has been disrupted by a
thunderstorm, a static charge or another
external factor, follow this procedure to resolve
the problem: Power off this device and power on
it again 10 seconds later.
No sound - The volume may be set too low or in mute mode.
- In Bluetooth / AUX in mode: Set the volume of
the external device to the maximum and then
control the volume by using "
(08)" button.
No Bluetooth® - Take care to ensure that all settings have been
connection made correctly on all devices. The Bluetooth®
function may be deactivated on the external
device. (re) activate it, if necessary.
- Check whether the device to be connected is
switched on and is in search mode.
Device freezed - Take use a small paperclip and insert it carefully
(no reaction on into the reset hole on the back until you feel a
buttons/screen) click. This will do a soft reset. (all presets and
setting will remain).
Specification
Unit Dimension
Unit Weight
Display
Bluetooth
DAB
FM
Audio Output Power
Power Source Input
Built-in-Battery
Operating
Temperature
Guarantee
Lenco offers service and warranty in accordance to European law, which
means that in case of repairs (both during and after the warranty period) you
should contact your local dealer.
Important note: It is not possible to send products that need repairs to Lenco
(07)" or "
directly.
Important note: If this unit is opened or accessed by a non-official service
center in any way, the warranty expires.
This device is not suitable for professional use. In case of professional use, all
warranty obligations of the manufacturer will be voided.
Disclaimer
Updates to Firmware and/or hardware components are made regularly.
Therefore some of the instruction, specifications and pictures in this
documentation may differ slightly from your particular situation. All items
5
180 (L) *55mm (W) *68mm (H)
407g
Type TFT color Display
Size 2.4inch
Specification V5.0
Supported Profile A2DP, AVRCP, HSP
Connection 10 meters (open
Distance area)
Power Class II
Tuning Range Band III;
174.928MHz –
239.2MHz
Preset Memory 30 stations
Tuning Range 87.5 - 108MHz
Stereo/Mono Selectable
Preset Memory 30 stations
Antenna telescopic type
Output Power 2 x 3 W RMS
Freq. Responses 80Hz to 16, 000Hz
TYPE-C USB Port
PC's USB port Power or DC 5V, 2A
Lithium-ion 3.7V 2500mAh
0-40°C