Buffalo GK642-E Manuel D'utilisation page 160

MULTI - STAGE COOKING.
1. Upon pressing the PROG button, the oven will enter
Program mode. The display will be cleared.
2. Using the Number buttons, enter the program number from
1 to 20.
3. Then, press the Power Level button to select power.
By pressing the Power Level button repeatedly, you can
select the power level - HI, MED, or LOW.
4. Use the Number buttons to enter the cooking time. You can
set a time from one second to 30 minutes. To set a time
over one minute, enter the seconds as well.
For example, to set 10 minutes, enter 1, 0, 0, 0.
5. Repeat step 3 and 4 for II or III stage memory
proggramming.
6. Press the PROG button to complete setting the memory.
The display will show '0'.
The maxium allowable cooking time is 30 min. If the time exceed 30 min, the display
will show "E3", then press Stop/Cancel button and repeat the steps.
GK642-E_XEU-DE68-04280B-01_EN.indd 16
USING MEMORY PROGRAMMING.
Press the Number buttons to select user-programmed memory functions (please refer to
memory programming) from 1 to 20.
Press the Start button.
If the DEFROST function is included in STAGE COOKING, it works at first.
If you want to change program, just reset MEMORY PROGRAMMING.
USING THE CHECK BUTTON
Confirming the cooking time and Power Level in each memory program.
1. Clear all operations by pressing the Stop/Cancel button.
Press the Check button to enter Check mode.
2. Using the Number buttons, enter the program number from
1 to 20.
For example, suppose you press '5', for the Memory
Program 5 which is HI Power Level, I Stage cooking with a
time of 6 minutes and 30 seconds, 6:30.
First, '5' will be displayed. but will change to show the
3. After one second, the display will clear automatically.
If you want to check other Memory Programs, just enter the
Memory Program numbers.
4. Press the Stop/Cancel botton to exit the Check mode.
English - 16
2014-06-27 6:53:04