SilverCrest 322244 Mode D'emploi Et Consignes De Sécurité page 29

Press the START / STOP button
device.
Note: The device switches off automatically after one
minute when no button has been pressed.
Deleting data
To delete the memory of the selected user, press the
memory button M
The average value of all measurements will appear on
the display. Next to this, "A" and the Bluetooth
fer symbol
Keep the function buttons - / +
for 5 seconds.
After successful deletion, "CL 00" will appear in the
display.
The data has been deleted.
Cleaning and care
ATTENTION! Possible property damage! Never hold
the product under water as liquid could enter the product
and damage it.
Clean the device and cuff
damp cloth.
Do not use cleaners or solvents.
when the device is switched off.
5
will flash.
22
to switch off the
8
pressed simultaneously
7
carefully using a slightly
1
trans-
®
GB/IE/NI 29