Publicité
Les langues disponibles
Les langues disponibles
EngLIsh
HEDGE TRIMMER
DCMHT573
Congratulations!
You have chosen a D
WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.
Technical Data
Voltage
Type
Battery type
Blade strokes (no load)
Blade length
Blade gap
Blade strokes per minute
Blade break time
Weight (without battery pack)
Noise values and/or vibration values (triax vector sum) according to EN62841:
L
(emission sound pressure level)
PA
K (uncertainty for the given sound level)
L
(sound power level)
WA
K (uncertainty for the given sound level)
Vibration emission value a
=
h
Uncertainty K =
The vibration and/or noise emission level given in this information
sheet has been measured in accordance with a standardised test
given in EN62841 and may be used to compare one tool with
another. It may be used for a preliminary assessment of exposure.
WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However
if the tool is used for different applications, with different
accessories or poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase
the exposure level over the total working period.
An estimation of the level of exposure to vibration and/or
noise should also take into account the times when the tool
is switched off or when it is running but not actually doing
the job. This may significantly reduce the exposure level
over the total working period.
Identify additional safety measures to protect the operator
from the effects of vibration and/or noise such as: maintain
the tool and the accessories, keep the hands warm
(relevant for vibration), organisation of work patterns.
24
EC‑Declaration of Conformity
o
Machinery Directive
WALT one of the
e
Hedge Trimmer
DCMHT573
DCMHT573
V
54
DC
D
1
Data are in compliance with:
Li‑Ion
2006/42/EC, EN62841‑1:2015; EN62841‑4‑2:2019.
min
1700
‑1
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact D
mm
650
the following address or refer to the back of the manual.
mm
31
The undersigned is responsible for compilation of the technical
3400
file and makes this declaration on behalf of D
s
<1
kg
4.1
Markus Rompel
dB(A)
81
Vice‑President Engineering, PTE‑Europe
dB(A)
3.0
D
dB(A)
92
65510, Idstein, Germany
dB(A)
3.3
09.10.2021
m/s
2
3.8
m/s
1.5
2
D
Data are in compliance with:
The Supply of Machinery (Safety) Regulations, 2008, S.I.
2008/1597 (as amended),
EN62841‑1:2015; EN62841‑4‑2:2019.
These products conform to the following UK Regulations:
Electromagnetic Compatibility Regulations, 2016, S.I.2016/1091
(as amended).
The Restriction of the Use of Certain Hazardous Substances
in Electrical and Electronic Equipment Regulations 2012, S.I.
2012/3032 (as amended).
For more information, please contact D
address or refer to the back of the manual.
WALT declares that these products described under Technical
e
WALT, Richard‑Klinger‑Straße 11,
e
DECLARATION OF CONFORMITY
THE SUPPLY OF MACHINERY (SAFETY)
REGULATIONS 2008
Hedge Trimmer
DCMHT573
WALT declares that these products described under Technical
e
WALT at
e
WALT.
e
WALT at the following
e
Publicité
