Linea 2000 Domo DO1068J Mode D'emploi page 23

PARTS
1. Food pusher
2. Lid with fill opening
3. Sieve
4. Drip tray with juice dispenser
5. Locking brackets
6. Pulp container
7. Control button
8. Base
9. Measuring cup
BEFORE THE FIRST USE
· Clean the removable parts with warm water.
· Always completely unwind the electrical cable when in use.
· Make sure all packaging materials and promotional stickers have been removed before using the
appliance for the first time. Make sure children cannot play with the packaging materials.
INSTALLATION
1. Place the pulp container against the side of the base, on the designated platform.
2. Place the drip tray with juice dispenser on the base. Make sure that the tab of the drip tray hooks
over the pulp container. This keeps the container in place.
3. Place the sieve in the drip tray and lock it in place so that the sieve is fixed on the drive shaft. You
may need to rotate the sieve a little so that it connects to the shaft.
4. Place the lid with fill opening. Make sure that the tab on the lid fits into the recess of the drip tray.
5. Slide the pusher into the fill opening in the lid.
6. Lift up the brackets and clasp them around the lid.
www.domo-elektro.be
7 8
6
1
2
3
4
5
9
23
DO1068J