H-9437, H-9438
2 CHANNEL
CABLE PROTECTOR
COMPONENTS
39" Lineal Protector
ASSEMBLY
Interlock with connectors to extend protection length.
(See Figure 1)
Figure 1
Cover
• Inspect areas for safety hazards.
• Assemble sections by aligning male connectors over
female connectors and press with foot to secure.
• Close cover flush with base.
• Test installation for intended use.
PAGE 1 OF 6
1-800-295-5510
uline.com
INSTRUCTIONS
CHANNEL CAPACITY
MODEL
NO.
H-9437
H-9438
LOAD CAPACITY
The 2 Channel Cable Protector has different load
supporting capabilities depending on type of vehicle
and temperature. Suitability must be verified by testing
under actual conditions.
Load-supporting capacity varies by type of loading
conditions and environment conditions. The load
capacity decreases in warm environments. Test before
use and inspect periodically.
MODEL
LOAD CAPACITY PER TIRE
NO.
H-9437
H-9438
OPERATING TEMPERATURE
-40° to 120°F (-40° to 48°C)
CHEMICAL RESISTANCE
Tested for compatibility with common motor oils,
gasoline and diesel fuel. Limited resistance to brake
fluids and other chemicals.
MATERIAL
Polyurethane Elastomer
Para Español, vea páginas 3-4.
Pour le français, consulter les pages 5-6.
CHANNEL CAPACITY – MAX DIAMETER INCHES
1.25" width x 1.375" height
1.125" width x 1.25" height
LOAD CAPACITY PER AXLE
MAX LOAD 70°F (21°C)
MAX LOAD 70°F (21°C)
8,000 lbs.
12,000 lbs.
16,000 lbs.
24,000 lbs.
0224 IH-9437