H-6955
HEAVY DUTY 3 CHANNEL
CABLE PROTECTOR
COMPONENTS
36" Lineal Protector
ASSEMBLY
Interlock with dog-bone connectors to extend protection
length. (See Figure 1)
Figure 1
• Inspect areas for safety hazards.
• Assemble sections by aligning female connectors
over male connectors and press with foot to secure.
• Close cover flush with base.
• Test installation for intended use.
• Periodically inspect installation.
PAGE 1 OF 6
1-800-295-5510
uline.com
INSTRUCTIONS
CHANNEL CAPACITY
CHANNEL CAPACITY - MAX. DIAMETER INCHES
LOAD CAPACITY
The Heavy Duty 3 Channel Cable Protector has different
load supporting capabilities depending on type of
vehicle and temperature. Suitability must be verified by
testing under actual conditions.
Load-supporting capacity varies by type of loading
conditions and environmental conditions. The load
capacity decreases in warm environments. Test before
use and inspect periodically.
MODEL
LOAD CAPACITY PER TIRE
NO.
MAX LOAD 70°F (21°C)
H-6955
OPERATING TEMPERATURE
-40° to 120°F (-40° to 48°C)
CHEMICAL RESISTANCE
Tested for compatibility with common motor oils, gasoline
and diesel fuel. Limited resistance to brake fluids and
other chemicals.
MATERIAL
UV-stabilized polyurethane elastomer.
Para Español, vea páginas 3-4.
Pour le français, consulter les pages 5-6.
2" width x 2.125" height
LOAD CAPACITY PER AXLE
MAX LOAD 70°F (21°C)
14,210 lbs.
28,420 lbs.
0421 IH-6955