Publicité
CU/ KADIU
Selecting a different track during playback
The track number appears briefly in the display when
you press SEARCH ma or »»1 to skip tracks.
e Press SEARCH »»1 once or more to skip to the next
track(s}.
e Press SEARCH t<« more than once to skip to
previous tracks.
e Press SEARCH ma once and playback will return to
the beginning of the current track.
Finding a passage within a track
7 During playback, press and hold down
SEARCH ¡«< or pi.
— The CD is played at high speed and low volume;
the display will show £=:
and your current track
number.
2 Release SEARCH < or »» when you recognize the
passage you want.
—
Normal CD playback and standby clock time
resumes.
RADIO
1 Press ON/ OFF to switch on the radio.
= £1, is displayed briefly followed by the clock time
, and the last selected waveband.
2 Press FM/ AM if you wish to change waveband.
3 Adjust the sound using VOLUME + or A.
4 Adjust the TUNING wheel to tune to a radio station.
To improve reception:
FM: Extend pigtail at the back of the set fully for
optimum reception.
AM: uses a built-in antenna. Direct the antenna by
adjusting the position of your set.
5 Press ON/ OFF to switch off the radio.
>
and the waveband disappear from the
display.
SELLING ALARM UPTIUNS
SETTING THE ALARM OPTIONS
General
Two different alarm times, ALARM 1 or 2 can be set in
the CD, radio or buzzer modes. This can be useful when
for example you need to be woken up at a different
time during the week and at the weekend.
-
Remember to first set the DAY, clock and alarm time
functions correctly!
-
Make sure your selected alarm symbol is shown.
Viewing the Alarm Mode Options
1 Select your choice of alarm mode by pressing
ALARM 1 or ALARM 2 MODE/ OFF once or more to
find your respective mode.
— The alarm mode display sequence is shown:
- 15/42 - default volume level for start of gentle
wake alarm
`
- A 1: 18 — default maximum volume level for
gentle wake alarm
— Followed by the 3 different alarms:
(buzzer) A 42, or
{radio} 2 +, or
CD mode © with CD and a track number /- 5%.
2 Read the following chapters to adjust or select the
respective modes.
Adjusting the Gentle Wake Volume
A sure way of getting up in the mornings, the gentle
wake volume for the alarm begins from gentle volume
e.g/ 9-24 (00) and gradually increases to a higher
volume e.g. # 1277,
The default volume range is 2 a2 and # /. /8. If
you wish to change the default volume for the buzzer,
radio or CD alarm:
7 In the standby mode, press ALARM 1 MODE/ OFF
or ALARM 2 MODE/ OFF once.
2 As soon as ! 9° appears, press À or ¥ once or
more to adjust the starting volume of your alarm.
3 To set the maximum volume for your alarm, press
ALARM 1 MODE/ OFF or ALARM 2 MODE/ OFF
again to change to the # /: ££ display.
4 As soon as # /: /£ appears, press 4 or ₹ until you
17
reach the desired volume level { /#- 3.2").
Publicité
