Télécharger Imprimer la page

Publicité

Les langues disponibles

Les langues disponibles

Liens rapides

OPERATOR'S MANUAL
18 V LITHIUM-ION
BATTERY PACK
R840080
Use this battery pack for RIDGID
cordless lithium-ion products only. Refer to
the Operator's Manual provided with product.
Always mention the model number above
when communicating with us regarding your
battery pack.
SAFETY RULES
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS.
Failure to follow all instructions listed below, may result
in electric shock, fire and/or serious personal injury.
 Battery tools do not have to be plugged into an
electrical outlet; therefore, they are always in
operating condition. Be aware of possible hazards
when not using your battery tool or when changing
accessories. Following this rule will reduce the risk of
electric shock, fire, or serious personal injury.
 Do not place battery tools or their batteries near fire
or heat. This will reduce the risk of explosion and possibly
injury.
 Do not crush, drop or damage battery pack. Do not
use a battery pack or charger that has been dropped
or received a sharp blow. A damaged battery is subject
to explosion. Properly dispose of a dropped or damaged
battery immediately.
 Batteries can explode in the presence of a source
of ignition, such as a pilot light. To reduce the risk of
serious personal injury, never use any cordless product
in the presence of open flame. An exploded battery can
propel debris and chemicals. If exposed, flush with water
immediately.
 Charge only with RIDGID
of other chargers may result in personal injury, fire,
or damage.
 Do not charge in an area of extreme heat or cold. It
will work best at normal room temperature. To reduce
the risk of serious personal injury, do not store outside or
in vehicles.
 Under extreme usage or temperature conditions,
battery leakage may occur. If liquid comes in contact
with your skin, wash immediately with soap and water.
If liquid gets into your eyes, flush them with clean
water for at least 10 minutes, then seek immediate
medical attention. Following this rule will reduce the risk
of serious personal injury.
®
18 V battery chargers. Use
®
 When battery pack is not in use, keep it away from
other metal objects like: paper clips, coins, keys, nails,
screws, or other small metal objects that can make
a connection from one terminal to another. Shorting
the battery terminals together may cause sparks, burns,
or a fire.
 Always remove battery pack from your tool when you
are assembling parts, making adjustments, cleaning,
or when not in use. Removing battery pack will prevent
18V
accidental starting that could cause serious personal
injury.
 Always remove battery pack before storing the device.
 When battery becomes fully charged, unplug the
charger from the power supply and remove the battery
pack from the charger.
 Always wear eye protection with side shields marked
to comply with ANSI Z87.1. Failure to do so could result
in objects being thrown into your eyes and other possible
serious injuries.
 Keep battery pack dry, clean, and free from oil and
grease. Always use a clean cloth when cleaning. Never
use brake fluids, gasoline, petroleum-based products, or
any solvents to clean battery pack.
 Do not use a battery pack that is damaged or modified.
Damaged or modified batteries may exhibit unpredictable
behavior resulting in fire, explosion or risk of injury.
 Do not modify or attempt to repair a battery pack that
has been damaged.
 Do not expose a battery pack or appliance to fire or
excessive temperature. Exposure to fire or temperature
above 265°F (130°C) may cause explosion.
 Have servicing performed by a qualified repair person
using only identical replacement parts. This will ensure
that the safety of the product is maintained.
 Follow all charging instructions and do not charge the
battery pack or appliance outside of the temperature
range specified in the instructions. Charging improperly
or at temperatures outside of the specified range may
damage the battery and increase the risk of fire.
 Save these instructions. Refer to them frequently and
use them to instruct others who may use this tool. If you
loan someone this tool, loan them these instructions also.
OPERATION
LITHIUM-ION BATTERY PACKS
Lithium-ion batteries deliver fade free power for their entire
run time. Lithium-ion tools will not gradually lose power
due to decreasing battery charge. Instead, power from the
battery pack will drop from full to zero once the full charge
has been drained from the battery. Once this happens,
recharging of the battery is required. It is not necessary to
drain the battery pack completely before recharging.
1 - English

Publicité

loading

Sommaire des Matières pour Ryobi R840080

  • Page 1 BATTERY PACK a connection from one terminal to another. Shorting the battery terminals together may cause sparks, burns, R840080 or a fire.  Always remove battery pack from your tool when you are assembling parts, making adjustments, cleaning, or when not in use.
  • Page 2 R840080 CHARGING A HOT BATTERY PACK When using a tool continuously, the battery pack may become hot. A hot battery pack may be placed directly onto the charger port but charging will not begin until the battery temperature cools to within acceptable temperature range.
  • Page 3 : les attaches trombones, BLOC-PILES pièces de monnaie, cléfs, clous, vis et autres petits objets R840080 métalliques risquant d’établir le contact entre les deux bornes. La mise en court-circuit des bornes de piles peut causer des étincelles, des brûlures ou un incendie.
  • Page 4 R840080 CHARGE D’UN PILE CHAUD Le bloc-piles peut devenir chaud lorsque l’outil est utilisé continuellement. Un pile chaud peut être placé directement sur le chargeur, mais la charge ne commencera que lorsque la température de la pile atteindra la plage de température acceptable.
  • Page 5 DE IONES DE LITIO terminales de las baterías puede causar quemaduras o incendios, y puede conducir a lesiones personales o daños materiales. R840080  Siempre retire el paquete de baterías de la herramienta cuando esté ensamblando partes, realizando ajustes, limpiando o cuando ésta no esté en uso. Si retira el paquete de baterías, evitará...
  • Page 6 R840080 enfríe hasta alcanzar un rango de temperatura aceptable. Cuando se introduce un paquete de baterías caliente en el cargador, el cargador puede indicar que el paquete no está listo para la carga. Cuando el paquete de la batería se enfría y llega aproximadamente a la temperatura ambiente, el cargador comenzará...
  • Page 7  Wear appropriate personal protective equipment, WARNING: including eye protection and rubber gloves.  Place your exposed battery pack in a large bucket, such NEVER IMMERSE OR EXPOSE YOUR as a 5 gallon or similar bucket, and fill the bucket with BATTERY PACK, TOOL, OR CHARGER regular tap water.
  • Page 8 MANUAL DEL OPERADOR 18 V LITHIUM-ION BATTERY PACK 18 V LITHIUM-ION BLOC-PILES PAQUETE DE BATERÍAS DE 18 V DE IONES DE LITIO R840080 Customer Service Information: For parts or service, do not return this product to the store. Contact your nearest RIDGID authorized service center.