Publicité
Les langues disponibles
Les langues disponibles
Installation Requirements
Precautions
Use a 100V to 240V AC power supply for the device.
Connect the grounding wire to an equipotential socket.
The power supply of the display system shall be in phase with that of the image
controller and PC.
Protect the power cord from being tramped or pressed.
Do not open the cabinet as there are high-voltage components inside.
During the installation, do not knock, squeeze, or carve the screen with hard objects.
Unplug the power cord if the device is not in use for long and wait three minutes before
rebooting.
Condensation may occur inside the device. Please wait for the condensation to fully
dissipate before powering on the device.
Contact a trained professional for maintenance.
Site Environment
Keep the device in a suitable place with proper temperature, humidity, ventilation, and
no electromagnetic radiation.
Install or place the device on a at surface.
5
Publicité
