FS E Serie Guide De Démarrage Rapide page 10

2. Verify the installation direction of the wireless module, and insert the wireless module.
Basic Operation
Cable Connection
For stable image quality, use high-quality DVI, VGA, or HDMI cables if the cable length
exceeds ve meters.
NOTE: Image noises are possible if the cable connector is loose or the gold
plating is worn out after a long period of use.
Startup
1. For the rst use, connect the device to power and turn the power switch on.
2. After startup, complete the initial con guration according to the startup wizard and set
the network under Settings > Network.
NOTE: You can set the boot mode under Settings > General > Boot Mode.
Power Connector
(Side of the Device)
Power Switch
(Side of the Device)
Power Button
(Bottom of the Device)
9