Publicité
Les langues disponibles
Les langues disponibles
·
Do not overbend the cables during the installation. Otherwise, poor cable contact may cause
malfunction.
·
Do not hold the tail cable by hand for weight bearing. Otherwise, the cable connector of the camera
could be loosened.
·
When connecting to an external interface, use an existing connection terminal, and ensure that the
cable terminal (latch or clamp) is in good condition and properly fastened.
·
Ensure that the cable is not tense during mounting, with a proper margin reserved to avoid poor port
contact or loosening caused by shock or shake.
·
Do not remove the protective lm on the device until mounting is nished. Remove it before powering
on the device.
·
Contact professionals for maintenance information. Do not attempt to dismantle the device by yourself.
We shall not assume any responsibility for problems caused by unauthorized repair or maintenance.
Maintenance
·
If there is dust on the front glass surface, remove the dust gently using an oil-free brush or a dust
blowing ball.
·
Clean the glass surface gently from the center outward using the lens cleaning cloth. If necessary, use
the cloth dipped with detergent.
4
Publicité
