Publicité
Les langues disponibles
Les langues disponibles
Follow these steps to log in your camera through the Web:
1. Open your browser, input the IP address of your camera in the address bar and then press Enter to open
the login page. The default IP is 192.168.1.13.
2. Enter the default username and password (admin/admin) and then click Login.
NOTE:
1. DHCP is enabled by default. If a DHCP server is used in your network, your camera may
be assigned an IP address, and you need to use the assigned IP address to log in.
2. You may need to install a plug-in at your rst login. Please follow the on-screen instructions to
complete the installation and then open the browser again to log in.
3. The default password is intended only for your rst login. To ensure security, please change
the password after your rst login. You are strongly recommended to set a strong password of
at least nine characters including all three elements: digits, letters and special characters.
4. If the password has been changed, please use the new password to log in.
10
IPC205-5M-P
Username
admin
Password
*****
Live View
Login
English
Forgot Password?
Reset
Publicité
