Royal Sovereign PFNC-20DX Guide D'utilisation page 3

PFNC-20DX
WARNING
Shock Hazard: Use the fan only in dry environments. This fan is not intended for use in a bathroom,
laundry area or similar locations or near sinks, washing machines, swimming pools or other sources of
water. Never locate fan where it may fall into a bathtub or other water receptacle. Do not use in damp
environments such as flooded basements.
Hot Surfaces: Do not touch fan motor when in use. The motor is hot when in use. To avoid burns, do
not let bare skin touch hot surfaces.
Fire Hazard: Fans have arching or sparkling parts inside. Do not use near combustible materials or
flammable gases or sources of heat. Do not use in areas where gasoline, pain or flammable materials
are used or stored. To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not
insert or allow foreign object to enter any ventilation or exhaust opening as this may cause an electric
shock, fire or damage the fan.
Prevent Electric Shock: This fan has a three prong grounded plug that must be inserted into a
matching properly grounded outlet to reduce the risk of electrical shock. Do not attempt to defeat this
safety feature. Do not use this fan with any solid-state speed control devices.
ASSEMBLY INSTRUCTIONS
Assembling The Fan Base (Step 1 and 2)
1. Insert the end of the outer pole into the base hole (Refer to Fig 1. and Fig 2.)
2. Align the hole on the base with the one on the clump weight. Insert the L-shaped
screw bolt through the holes with the big washer (Refer to Fig. 3. and Fig. 4).
3. Loosen the extension pole nut onto the outer pole (Refer to Fig. 5)
4. Insert the cap through the outer pole (Refer to Fig. 6)
Fig. 1 Fig. 2 Fig. 3
Fig. 4 Fig. 5
-3-