OPERATING AND MOUNTING INSTRUCTIONS
FORMAT Fire Safe Light FP
4.1
Anchoring method
Place the cabinet at the intended location and align it so it is level. The cabinet door
must remain in position and must not move automatically. Mark the drilling position
in the area to be anchored through the anchoring hole in the cabinet. Remove the
cabinet again and drill the anchoring hole in the substrate with a drill bit suitable for the
anchoring material. Now clean the drill hole (suck out drilling dust) and insert the plug into
the drill hole.
Put the document safe cabinet in its final position and screw it down until the screw head is
tight against the fastening sleeve inside the cabinet.
5
MAINTENANCE AND SERVICE
EN
The bolt mechanism and the lock are maintenance-free.
If you have any further questions about your document safe or if technical problems
occur, please contact your dealer or the manufacturer of your document safe:
Format GmbH
Industriestraße 10-24
D-37235 Hessisch Lichtenau, Germany
Phone +49 5602 / 939 888
www.format-tresorbau.de
6
DISPOSAL
Dear customer,
Please help us avoid waste. If at any time you intend to dispose of your document safe,
please remember that many components of this safe cabinet consist of valuable materials
that can be recycled.
We would like to point out that batteries must not be disposed of with household waste,
but collected separately. Please enquire about collection points for electrical waste.
7
TECHNICAL DATA
Dimensions:
(height x width x depth)
Weight:
Door hinge:
Anchoring holes:
Lock:
We reserve the right for errors and changes
14
Batteries or accumulators with this symbol
contain harmful substances.
Declaration of conformity: Products marked with this symbol
comply with all applicable regulations of the European
Economic Area.
Dispose of the packaging according to its type. Information on disposal
is also available from your local authority.
335 mm x 460 mm x 452 mm
(depth without handle and fittings)
28 kg
Right
1 hole in the base, 1 hole in the rear wall
Electronic lock